Stainless Steel Interleaving Paper
Interleaving between polished stainless sheet and coil — specified for what it leaves behind, which should be nothing.
What it is.
Interleaving paper protects a polished stainless surface while it is stacked, coiled and shipped. The paper never has to look good; it has to be chemically inert against the steel and mechanically clean enough not to mark it. So the specification is dominated by negatives: low ionic extractables, neutral pH, no dirt specks that will emboss into a mirror finish under stack pressure.
Temperature resistance matters where the sheet is interleaved before a heat process. And the paper still has to run — it is unwound and laid at line speed, so tensile and burst are specified across the grammage range so a light sheet does not snap on the layer table.
The range runs 23 to 45 g/m², with tensile rising from 1.4 kN/m MD at the lightest weight to 3.0 kN/m at the heaviest, and burst from 50 to 100 kPa.
Typical applications
- Stainless steel sheet and coil interleaving
- Polished and mirror-finish surface protection
- Metal service centre and slitting lines
Typical properties
| Property | Typical value | Method |
|---|---|---|
| Grammage | 23 · 25 · 28 · 30 · 32 · 35 · 40 · 45 g/m², ±2 | ISO 536 |
| Moisture | 5 %, ±1.2 | GB/T 462 |
| Elongation MD | ≥ 1.2 % | GB/T 12914 |
| Tensile strength MD | ≥ 1.4 – 3.0 kN/m by grammage | GB/T 12914 |
| Tensile strength CD | ≥ 0.6 – 1.2 kN/m by grammage | GB/T 12914 |
| Bursting strength | ≥ 50 – 100 kPa by grammage | GB/T 454 |
| Chemistry | Neutral, low ionic extractables |
Typical values from mill technical data — not a guaranteed specification. The binding specification is agreed with you before the mill runs.
Supply detail.
Sourced from mills across the Far East — China, Malaysia, Taiwan, Indonesia and Vietnam. Reels or sheets, containerised out of Far East ports, with export documentation prepared to the destination market's requirements.
Need this grade quoted?
Send the specification, the quantity and the discharge port — you will get a quotation from someone who knows the mill, usually within one working day.
Request specification & quoteBuying it.
Can Victory Far East supply Stainless Steel Interleaving Paper?
Yes. Stainless Steel Interleaving Paper is supplied from mills across the Far East — China, Malaysia, Taiwan, Indonesia and Vietnam — with inspection before shipment and export documentation prepared to the destination market.
What is the minimum order for Stainless Steel Interleaving Paper?
Most grades ship from single-container quantities. The exact minimum depends on the mill and the run — tell us the specification and we will confirm it with the quotation.
How do I get a Stainless Steel Interleaving Paper quotation?
Send the specification, the quantity and the discharge port. You will get a quotation from someone who knows the mill, usually within one working day.